TARGET:          8132 Vitginzburg
SESSION NUMBER:  263
DATE/TIME:       2008 Jun 08 @ 06:23
FILTER:          C
TELESCOPE:       0.35m SCT
FOCAL LENGTH:    135.58
CAMERA:          Alta U6 1 x binning
TEMP (C):        -30
EXPOSURE (s):    240
APPROX. RA:      15:05
APPROX. DEC:     -11
EXPOSURE JD:     Mid-exposure
JD CORR METHOD:  Light-time
JD CORRECTION:   JD = JD(raw) - 0.00824d
UNITY CORR:      -5 * log(SunDist * EarthDist): -2.6354
NOTE: The unity correction is NOT included in the reduced magnitudes.
MAG. METHOD:     Instrumental
 
NOTE:            For multiple sessions, differential magnitudes include
                 adjustments ADDED to the Obj-CAvg value to compensate
                 for changing phase angle, distance, and refinements to
                 the base average value of the comparison stars.       
                                                                       
                 The phase angle calculations include the effects of   
                 the phase parameter, G. This value is taken from the  
                 MPCORB value at the time the calculations were made.
BASE COMP VALUE: -7.496
BASE CORRECTION: +0.000
PHASE/DIST CORR: +0.000
P/D ADJUST (-/DAY):+0.024
P/D ADJUST (+/DAY):-0.024
THE P/D ADJUSTMENTS ARE INCLUDED IN THE VALUES BELOW.
 
ERROR CALC:      The magnitude error is calculated by the following:
                 Err = sqrt(sqr(ERR[target]) + sqr(Err[Comps]))
                       where Err[Target] = 1.0857/SNR[target]
                             Err[Comps]  = sqrt(sqr(1.0857/SNR[Comp1])... + sqr(1.0857/SNR[CompN])) / N
                 The factor of 1.0857 converts flux to magnitudes (Howell)
 
*********************************************************************************************
TARGET:          8132 Vitginzburg
SESSION NUMBER:  267
DATE/TIME:       2008 Jun 09 @ 06:24
FILTER:          C
TELESCOPE:       0.35m SCT
FOCAL LENGTH:    135.36
CAMERA:          Alta U6 1 x binning
TEMP (C):        -30
EXPOSURE (s):    240
APPROX. RA:      15:04
APPROX. DEC:     -11
EXPOSURE JD:     Mid-exposure
JD CORR METHOD:  Light-time
JD CORRECTION:   JD = JD(raw) - 0.00828d
UNITY CORR:      -5 * log(SunDist * EarthDist): -2.6461
NOTE: The unity correction is NOT included in the reduced magnitudes.
MAG. METHOD:     Instrumental
 
NOTE:            For multiple sessions, differential magnitudes include
                 adjustments ADDED to the Obj-CAvg value to compensate
                 for changing phase angle, distance, and refinements to
                 the base average value of the comparison stars.       
                                                                       
                 The phase angle calculations include the effects of   
                 the phase parameter, G. This value is taken from the  
                 MPCORB value at the time the calculations were made.
BASE COMP VALUE: -8.184
BASE CORRECTION: -0.688
PHASE/DIST CORR: +0.023
P/D ADJUST (-/DAY):+0.023
P/D ADJUST (+/DAY):-0.023
THE P/D ADJUSTMENTS ARE INCLUDED IN THE VALUES BELOW.
 
ERROR CALC:      The magnitude error is calculated by the following:
                 Err = sqrt(sqr(ERR[target]) + sqr(Err[Comps]))
                       where Err[Target] = 1.0857/SNR[target]
                             Err[Comps]  = sqrt(sqr(1.0857/SNR[Comp1])... + sqr(1.0857/SNR[CompN])) / N
                 The factor of 1.0857 converts flux to magnitudes (Howell)
 
*********************************************************************************************
TARGET:          8132 Vitginzburg
SESSION NUMBER:  269
DATE/TIME:       2008 Jun 10 @ 05:24
FILTER:          C
TELESCOPE:       0.35m SCT
FOCAL LENGTH:    135.38
CAMERA:          Alta U6 1 x binning
TEMP (C):        -30
EXPOSURE (s):    240
APPROX. RA:      15:04
APPROX. DEC:     -11
EXPOSURE JD:     Mid-exposure
JD CORR METHOD:  Light-time
JD CORRECTION:   JD = JD(raw) - 0.00832d
UNITY CORR:      -5 * log(SunDist * EarthDist): -2.6560
NOTE: The unity correction is NOT included in the reduced magnitudes.
MAG. METHOD:     Instrumental
 
NOTE:            For multiple sessions, differential magnitudes include
                 adjustments ADDED to the Obj-CAvg value to compensate
                 for changing phase angle, distance, and refinements to
                 the base average value of the comparison stars.       
                                                                       
                 The phase angle calculations include the effects of   
                 the phase parameter, G. This value is taken from the  
                 MPCORB value at the time the calculations were made.
BASE COMP VALUE: -7.589
BASE CORRECTION: -0.093
PHASE/DIST CORR: +0.046
P/D ADJUST (-/DAY):+0.024
P/D ADJUST (+/DAY):-0.024
THE P/D ADJUSTMENTS ARE INCLUDED IN THE VALUES BELOW.
 
ERROR CALC:      The magnitude error is calculated by the following:
                 Err = sqrt(sqr(ERR[target]) + sqr(Err[Comps]))
                       where Err[Target] = 1.0857/SNR[target]
                             Err[Comps]  = sqrt(sqr(1.0857/SNR[Comp1])... + sqr(1.0857/SNR[CompN])) / N
                 The factor of 1.0857 converts flux to magnitudes (Howell)
 
*********************************************************************************************